Managing Port Template Associations; Apply Or Edit A Port Template - Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide

Managing Port Template Associations

Apply or Edit a Port Template

636
juniper-port-template-wireless-access-point
juniper-port-template-cos-settings
We strongly recommend that you do not change or delete these configuration groups.
See "Configuring Devices" on page 185 for more information.
1. Managing Port Template Associations on page 636
2. Apply or Edit a Port Template on page 636
3. Detect and Resolve Configuration Conflicts on page 638
4. Clone a Port Template on page 638
5. Edit a Port Template on page 639
To manage port templates and the associated interfaces:
In the navigation tree, select
1.
a list of the supported port templates.
Select a port template.
2.
Click one:
3.
Apply/remove selected template on port—Use this option to apply or remove the
port template association with the interface. See "Apply or Edit a Port Template"
on page 636.
Detect/resolve configuration conflicts—Use this option to resolve conflicts between
the port template configuration and the actual configuration on the associated
device. See "Detect and Resolve Configuration Conflicts" on page 638for details.
Customize port template CoS parameters—Use this option to create a customized
template by modifying CoS parameters. This option is activated only if the selected
port template is Desktop plus Phone port, Layer 2 Uplink Port, or Routed Uplink
Port. See "Clone a Port Template" on page 638
Edit customized port template CoS parameters—Use this option to edit the
customized port template settings. See "Edit a Port Template" on page 639
Delete customized port template—Use this option to delete a customized port
template.
View port template configuration—Use this option to view configuration details
for a selected port template.
The Manage Template Association screen displays the list of EX Series switches and
their interfaces on which the selected port template is currently applied.
To apply a port template:
Device Manager > Port Templates
Copyright © 2010, Juniper Networks, Inc.
. The screen displays