Show Ip Dvmrp; Show Ip Dvmrp Interface - NETGEAR GSM7228PS Cli Manual

show ip dvmrp

This command displays the system-wide information for DVMRP.
Format
show ip dvmrp
Modes • Privileged EXEC
• User EXEC
Term Definition
Admin Mode Indicates whether DVMRP is enabled or disabled.
Version The version of DVMRP being used.
Total Number of The number of routes in the DVMRP routing table.
Routes
Reachable The number of entries in the routing table with non-infinite metrics.
Routes
The following fields are displayed for each interface.
Term Definition
Interface Valid unit, slot, and port number separated by forward slashes.
Interface-Mode The mode of this interface. Possible values are Enabled and Disabled.
Operational- The current state of DVMRP on this interface. Possible values are Operational or Non-
status
Operational.

show ip dvmrp interface

This command displays the interface information for DVMRP on the specified interface.
Format
show ip dvmrp interface <unit/slot/port>
Modes • Privileged EXEC
• User EXEC
Term Definition
Interface Mode Indicates whether DVMRP is enabled or disabled on the specified interface.
Metric The metric of this interface. This is a configured value.
Local Address The IP address of the interface.
IP Multicast Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
5-9