Show Diffserv - NETGEAR GSM7228PS Cli Manual

If the class-name is specified the following fields are displayed:
Term Definition
Class Name The name of this class.
Class Type A class type of 'all' means every match criterion defined for the class is evaluated
simultaneously and must all be true to indicate a class match.
Class Layer3 The Layer 3 protocol for this class. Possible values are IPv4 and IPv6.
Protocol
Match Criteria The Match Criteria fields are only displayed if they have been configured. Not all platforms
support all match criteria values. They are displayed in the order entered by the user. The
fields are evaluated in accordance with the class type. The possible Match Criteria fields
are: Destination IP Address, Destination Layer 4 Port, Destination MAC Address,
Ethertype, Source MAC Address, VLAN, Class of Service, Every, IP DSCP, IP
Precedence, IP TOS, Protocol Keyword, Reference Class, Source IP Address, and
Source Layer 4 Port.
Values The values of the Match Criteria.
If you do not specify the Class Name, this command displays a list of all defined DiffServ classes.
The following fields are displayed:
Term Definition
Class Name The name of this class. (Note that the order in which classes are displayed is not
necessarily the same order in which they were created.)
Class Type A class type of 'all' means every match criterion defined for the class is evaluated
simultaneously and must all be true to indicate a class match.
Reference Class The name of an existing DiffServ class whose match conditions are being referenced by
Name
the specified class definition.

show diffserv

This command displays the DiffServ General Status Group information, which includes the
current administrative mode setting as well as the current and maximum number of rows in each of
the main DiffServ private MIB tables. This command takes no options.
Format
show diffserv
Mode Privileged EXEC
Quality of Service (QoS) Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
8-27