Set Igmp Mrouter Interface; Ip Igmpsnooping Unknown-Multicast - NETGEAR GSM7228PS Cli Manual

set igmp mrouter interface

This command configures the interface as a multicast router interface. When configured as a
multicast router interface, the interface is treated as a multicast router interface in all VLANs.
Default disabled
Format
set igmp mrouter interface
Mode Interface Config
no set igmp mrouter interface
This command disables the status of the interface as a statically configured multicast router
interface.
Format
no set igmp mrouter interface
Mode Interface Config

ip igmpsnooping unknown-multicast

This command enables the filtering of unknown multicast packets to the VLAN. Packets with an
unknown mulicast address in the destination field will be dropped. This command is mainly used
when IGMP snooping is enabled, to prevent flooding of unwanted multicast packets to every port.
Format
ip igmpsnooping unknown-multicast
Mode Global Config
no ip igmpsnooping unknown-multicast
This command disables the filtering of unknown multicast packets. Unknown multicast packets
will be flooded to all ports in the same VLAN.
Format
no ip igmpsnooping unknown-multicast
Mode Global Config
Switching Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
3-145