Vlan Participation All; Vlan Port Acceptframe All - NETGEAR GSM7228PS Cli Manual

vlan participation all

This command configures the degree of participation for all interfaces in a VLAN. The ID is a
valid VLAN identification number.
Format
vlan participation all {exclude | include | auto} <1-4093>
Mode Global Config
You can use the following participation options:
Participation
Definition
Options
include The interface is always a member of this VLAN. This is equivalent to registration fixed.
exclude The interface is never a member of this VLAN. This is equivalent to registration
forbidden.
auto The interface is dynamically registered in this VLAN by GVRP. The interface will not
participate in this VLAN unless a join request is received on this interface. This is
equivalent to registration normal.

vlan port acceptframe all

This command sets the frame acceptance mode for all interfaces.
Default all
Format
vlan port acceptframe all {vlanonly | all}
Mode Global Config
The modes defined as follows:
Mode Definition
VLAN Only Untagged frames or priority frames received on this interface are discarded.
mode
Admit All mode Untagged frames or priority frames received on this interface are accepted and assigned
the value of the interface VLAN ID for this port.
With either option, VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q
VLAN Specification.
Switching Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
3-35