Show Isdp Entry; Show Isdp Neighbors - NETGEAR GSM7228PS Cli Manual

show isdp entry

This command displays ISDP entries. If the device id is specified, then only entries for that device
are shown.
Format
show isdp entry
Mode Privileged EXEC
Term Definition
Device ID The device ID associated with the neighbor which advertised the information.
IP Addresses The IP address(es) associated with the neighbor.
Platform The hardware platform advertised by the neighbor.
Interface The interface (slot/port) on which the neighbor's advertisement was received.
Port ID The port ID of the interface from which the neighbor sent the advertisement.
Hold Time The hold time advertised by the neighbor.
Version The software version that the neighbor is running.
Advertisement The version of the advertisement packet received from the neighbor.
Version
Capability ISDP Functional Capabilities advertised by the neighbor.

show isdp neighbors

This command displays the list of neighboring devices.
Format
show isdp neighbors [ {<unit/slot/port> |
Mode Privileged EXEC
Term Definition
Device ID The device ID associated with the neighbor which advertised the information.
IP Addresses The IP addresses associated with the neighbor.
Capability ISDP functional capabilities advertised by the neighbor.
Platform The hardware platform advertised by the neighbor.
Interface The interface (unit/slot/port) on which the neighbor's advertisement was received.
Switching Commands
Managed Switch CLI Manual, Release 8.0.3
{all | deviceid}
v1.0, July 2010
detail} ]
3-210