Debug Isdp Packet - NETGEAR GSM7228PS Cli Manual

Term
ISDPv2 Packets
Transmitted
ISDP Bad Header
ISDP Checksum Error
ISDP Transmission Failure
ISDP Invalid Format
ISDP Table Full
ISDP IP Address Table Full Displays the number of times a neighbor entry was added to the table

debug isdp packet

This command enables tracing of ISDP packets processed by the switch. ISDP must be enabled on
both the device and the interface in order to monitor packets for a particular interface.
Format
debug isdp packet [{receive | transmit}]
Mode Privileged EXEC
no debug isdp packet
This command disables tracing of ISDP packets on the receive or the transmit sides or on both
sides.
Format
no debug isdp packet [{receive | transmit}]
Mode Privileged EXEC
Switching Commands
Definition
Total number of ISDPv2 packets transmitted
Number of packets received with a bad header
Number of packets received with a checksum error
Number of packets which failed to transmit
Number of invalid packets received
Number of times a neighbor entry was not added to the table due to a full
database
without an IP address.
v1.0, July 2010
Managed Switch CLI Manual, Release 8.0.3
3-212