Enable (Instance) - NETGEAR GSM7228PS Cli Manual

no configuration
Use this command to to delete a CP configuration. The default configuration cannot be deleted.
Format
no configuration <1-10>
Mode Captive Portal Configuration mode

enable (Instance)

Use this command to enable a captive portal configuration.
Default enable
Format
enable
Mode Captive Portal Instance mode
no enable
Use this command to disable a configuration.
Defaul enable
Format
no enable
Mode Captive Portal Instance mode
name
Use this command to configure the name for a captive portal configuration. The cp-name can be
up to 32 alphanumeric characters in length.
Default Configuration 1 has the name "Default" by default. All other configurations
Format
name <cp-name>
Mode Captive Portal Instance mode
Captive Portal Commands
Managed Switch CLI Manual, Release 8.0.3
have no name by default.
v1.0, July 2010
12-6