Show Radius Statistics - NETGEAR GSM7228PS Cli Manual

(Switch) #show radius accounting statistics name Default_RADIUS_Server
RADIUS Accounting Server Name................. Default_RADIUS_Server
Host Address.................................. 192.168.37.200
Round Trip Time............................... 0.00
Requests...................................... 0
Retransmissions............................... 0
Responses..................................... 0
Malformed Responses........................... 0
Bad Authenticators............................ 0
Pending Requests.............................. 0
Timeouts...................................... 0
Unknown Types................................. 0
Packets Dropped............................... 0

show radius statistics

This command displays the summary statistics of configured RADIUS Authenticating servers.
Format
show radius statistics {<ipaddr|dnsname> | name <servername>}
Mode Privileged EXEC
Term
ipaddr
dnsname
servername
RADIUS Server Name The name of the authenticating server.
Server Host Address
Access Requests
Access
Retransmissions
Access Accepts
Access Rejects
Access Challenges
Management Commands
Definition
The IP address of the server.
The DNS name of the server.
The alias name to identify the server.
The IP address of the host.
The number of RADIUS Access-Request packets sent to this server. This number
does not include retransmissions.
The number of RADIUS Access-Request packets retransmitted to this RADIUS
authentication server.
The number of RADIUS Access-Accept packets, including both valid and invalid
packets, that were received from this server.
The number of RADIUS Access-Reject packets, including both valid and invalid
packets, that were received from this server.
The number of RADIUS Access-Challenge packets, including both valid and invalid
packets, that were received from this server.
v1.0, July 2010
Managed Switch CLI Manual, Release 8.0.3
10-65