Vlan Port Tagging All; Vlan Protocol Group - NETGEAR GSM7228PS Cli Manual

no vlan port pvid all
This command sets the VLAN ID for all interfaces to 1.
Format
no vlan port pvid all
Mode Global Config

vlan port tagging all

This command configures the tagging behavior for all interfaces in a VLAN to enabled. If tagging
is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is transmitted as
untagged frames. The ID is a valid VLAN identification number.
Format
vlan port tagging all <1-4093>
Mode Global Config
no vlan port tagging all
This command configures the tagging behavior for all interfaces in a VLAN to disabled. If tagging
is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN identification
number.
Format
no vlan port tagging all
Mode Global Config

vlan protocol group

This command adds protocol-based VLAN groups to the system. The <groupName> is a
character string of 1 to 16 characters. When it is created, the protocol group will be assigned a
unique number that will be used to identify the group in subsequent commands.
Format
vlan protocol group <groupname>
Mode Global Config
Switching Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
3-37