Debug Ip Pimsm Packet; Debug Ip Vrrp - NETGEAR GSM7228PS Cli Manual

debug ip pimsm packet

Use this command to trace PIMSM packet reception and transmission. receive traces only
received PIMSM packets and transmit traces only transmitted PIMSM packets. When neither
keyword is used in the command, then all PIMSM packet traces are dumped. Vital information
such as source address, destination address, control packet type, packet length, and the interface on
which the packet is received or transmitted is displayed on the console.
Default disabled
Format
debug ip pimsm packet [receive|transmit]
Mode Privileged EXEC
no debug ip pimsm packet
Use this command to disable debug tracing of PIMSM packet reception and transmission.
Format
no debug ip pimsm packet [receive|transmit]
Mode Privileged EXEC

debug ip vrrp

Use this command to enable VRRP debug protocol messages.
Default disabled
Format
debug ip vrrp
Mode Privileged EXEC
no debug ip vrrp
Use this command to disable VRRP debug protocol messages.
Format
no debug ip vrrp
Mode Privileged EXEC
Utility Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
9-71