Authentication Timeout; Show Captive-Portal - NETGEAR GSM7228PS Cli Manual

no https port
Use this command to reset the HTTPs port to the default HTTPS port 443.
Format
no https port
Mode Captive Portal Configuration mode

authentication timeout

Use this command to configure the authentication timeout. If the user does not enter valid
credentials within this time limit, the authentication page needs to be served again in order for the
client to gain access to the network.
Default 300
Format
authentication timeout <60-600>
Mode Captive Portal Configuration mode
no authentication timeout
Use this command to reset the authentication timeout to the default.
Default 300
Format
no authentication timeout
Mode Captive Portal Configuration mode

show captive-portal

Use this command to display the status of the captive portal feature.
Format
show captive-portal
Mode Privileged EXEC mode
Captive Portal Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
12-3