Clear Config; Clear Mac-Addr-Table; Clear Logging Buffered; Clear Counters - NETGEAR GSM7228PS Cli Manual

clear config

This command resets the configuration to the factory defaults without powering off the switch.
When you issue this command, a prompt appears to confirm that the reset should proceed. When
you enter y, you automatically reset the current configuration on the switch to the default values. It
does not reset the switch.
Format
clear config
Mode Privileged EXEC

clear mac-addr-table

This command clears the dynamically learned MAC addresses of the switch.
Format
clear mac-addr-table
Mode Privileged EXEC

clear logging buffered

This command clears the messages maintained in the system log.
Format
clear logging buffered
Mode Privileged EXEC

clear counters

This command clears the statistics for a specified <unit/slot/port>, for all the ports, or for
the entire switch based upon the argument.
Format
clear counters {<unit/slot/port> | all}
Mode Privileged EXEC
Utility Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
9-27