Term
Definition
Mode
Shows whether the interface is a IPv6 DHCP relay or server.
If the interface mode is server, the following information displays.
Term
Definition
Pool Name
The pool name specifying information for DHCPv6 server distribution to DHCPv6 clients.
Server
The preference of the server.
Preference
Option Flags
Shows whether rapid commit is enabled.
If the interface mode is relay, the following information displays.
Term
Definition
Relay Address
The IPv6 address of the relay server.
Relay Interface
The relay server interface in <unit/slot/port> format.
Number
Relay Remote
If configured, shows the name of the relay remote.
ID
Option Flags
Shows whether rapid commit is configured.
If you use the statistics parameter, the command displays the IPv6 DHCP statistics for the
specified interface. See
clear ipv6 dhcp
Use this command to clear DHCPv6 statistics for all interfaces or for a specific interface. Use the
<unit/slot/port> parameter to specify the interface.
Format
clear ipv6 dhcp {statistics | interface <unit/slot/port> statistics}
Mode
Privileged EXEC
IPv6 Commands
"show ipv6 dhcp statistics" on page 7-73
v1.0, July 2010
Managed Switch CLI Manual, Release 8.0.3
for information about the output.
7-75