Captive Portal User Group Commands - NETGEAR GSM7228PS Cli Manual

User ID User Name
------- --------------
1 user123
2 user234
(switch)#show captive-portal user 1
User ID........................................ 1
User Name...................................... user123
Password Configured............................ Yes
Session Timeout................................ 0
Idle Timeout................................... 0
Max Bandwidth Up (bytes/sec)................... 0
Max Bandwidth Down (bytes/sec)................. 0
Max Input Octets (bytes)....................... 0
Max Output Octets (bytes)...................... 0
Max Total Octets (bytes)....................... 0
Group ID
-------- --------------------------------
1
2
clear captive-portal users
Use this command to delete all captive portal user entries.
Format
clear captive-portal users
Mode Privileged EXEC mode

Captive Portal User Group Commands

The following section describes captive portal user group commands.
user group (Create)
Use this command to create a user group. User group 1 is created by default and cannot be deleted.
Captive Portal Commands
Session
Timeout
--------
10
0
Group Name
Default
group2
v1.0, July 2010
Managed Switch CLI Manual, Release 8.0.3
Idle
Timeout Group ID
-------- --------
13 1
0
Group Name
-----------
Default
1 Default
12-31