NETGEAR GSM7228PS Cli Manual page 343

ip mcast boundary
This command adds an administrative scope multicast boundary specified by <groupipaddr>
and <mask> for which this multicast administrative boundary is applicable. <groupipaddr> is
a group IP address and <mask> is a group IP mask.
Format ip mcast boundary <groupipaddr> <mask>
Mode Interface Config
no ip mcast boundary
This command deletes an administrative scope multicast boundary specified by
<groupipaddr> and <mask> for which this multicast administrative boundary is applicable.
<groupipaddr> is a group IP address and <mask> is a group IP mask.
Format no ip mcast boundary <groupipaddr> <mask>
Mode Interface Config
ip multicast
This command sets the administrative mode of the IP multicast forwarder in the router to active.
Default disabled
Format ip multicast
Mode Global Config
no ip multicast
This command sets the administrative mode of the IP multicast forwarder in the router to inactive.
Format
no ip multicast
Mode Global Config
IP Multicast Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
5-2