Set Mld Interfacemode - NETGEAR GSM7228PS Cli Manual

Default disabled
Format
set mld
Mode Global Config
Interface Config
Default disabled
Format
set mld <vlanid>
Mode VLAN Mode
no set mld
Use this command to disable MLD Snooping on the system.
Format
no set mld
Mode Global Config
Interface Config
Format
no set mld <vlanid>
Mode VLAN Mode

set mld interfacemode

Use this command to enable MLD Snooping on all interfaces. If an interface has MLD Snooping
enabled and you enable this interface for routing or enlist it as a member of a port-channel (LAG),
MLD Snooping functionality is disabled on that interface. MLD Snooping functionality is re-
enabled if you disable routing or remove port-channel (LAG) membership from an interface that
has MLD Snooping enabled.
Default disabled
Format
set mld interfacemode
Mode Global Config
Switching Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
3-154