Ip Ospf Retransmit-Interval; Ip Ospf Transmit-Delay - NETGEAR GSM7228PS Cli Manual

no ip ospf priority
This command sets the default OSPF priority for the specified router interface.
Format
no ip ospf priority
Mode Interface Config

ip ospf retransmit-interval

This command sets the OSPF retransmit Interval for the specified interface. The retransmit
interval is specified in seconds. The value for <seconds> is the number of seconds between
link-state advertisement retransmissions for adjacencies belonging to this router interface. This
value is also used when retransmitting database description and link-state request packets. Valid
values range from 0 to 3600 (1 hour).
Default 5
Format
ip ospf retransmit-interval <0-3600>
Mode Interface Config
no ip ospf retransmit-interval
This command sets the default OSPF retransmit Interval for the specified interface.
Format
no ip ospf retransmit-interval
Mode Interface Config

ip ospf transmit-delay

This command sets the OSPF Transit Delay for the specified interface. The transmit delay is
specified in seconds. In addition, it sets the estimated number of seconds it takes to transmit a link
state update packet over this interface. Valid values for <seconds> range from 1 to 3600 (1
hour).
Default 1
Format
ip ospf transmit-delay <1-3600>
Mode Interface Config
Routing Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
4-59