Lacp Actor Admin; Lacp Actor Admin Key - NETGEAR GSM7228PS Cli Manual

no lacp collector max delay
Use this command to configure the default port-channel collector max delay.
Format
no lacp collector max-delay
Mode Interface Config

lacp actor admin

Use this command to configure the LACP actor admin parameters.

lacp actor admin key

Use this command to configure the administrative value of the LACP actor admin key. The valid
range for <key> is 0-65535.
Default Internal Interface Number of this Physical Port
Format
lacp actor admin key <key>
Mode Interface Config
Note: This command is only applicable to physical interfaces.
no lacp actor admin key
Use this command to configure the default administrative value of the key.
Format
no lacp actor admin key
Mode Interface Config
Switching Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
3-94