Ipv6 Mld Query-Interval - NETGEAR GSM7228PS Cli Manual

Default Disabled
Format
ipv6 mld router
Mode Global Config
Interface Config
no ipv6 mld router
Use this command, in the administrative mode of the router, to disable MLD in the router.
Default Disabled
Format
no ipv6 mld router
Mode Global Config
Interface Config

ipv6 mld query-interval

Use this command to set the MLD router's query interval for the interface. The query-interval is
the amount of time between the general queries sent when the router is the querier on that
interface. The range for <query-interval> is 1 to 3600 seconds.
Default 125
Format
ipv6 mld query-interval <query-interval>
Mode Interface Config
no ipv6 mld query-interval
Use this command to reset the MLD query interval to the default value for that interface.
Format
no ipv6 mld query-interval
Mode Interface Config
IPv6 Multicast Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
6-17