Router Discovery Protocol Commands - NETGEAR GSM7228PS Cli Manual

show ip stats
This command displays IP statistical information. Refer to RFC 1213 for more information about
the fields that are displayed.
Format
show ip stats
Modes • Privileged EXEC
• User EXEC

Router Discovery Protocol Commands

This section describes the commands you use to view and configure Router Discovery Protocol
settings on the switch. The Router Discovery Protocol enables a host to discover the IP address of
routers on the subnet.
ip irdp
This command enables Router Discovery on an interface.
Default disabled
Format
ip irdp
Mode Interface Config
no ip irdp
This command disables Router Discovery on an interface.
Format
no ip irdp
Mode Interface Config
Routing Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
4-20