NETGEAR GSM7228PS Cli Manual page 110

Term Definition
Backend Current state of the backend authentication state machine. Possible values are Request,
Authentication
Response, Success, Fail, Timeout, Idle, and Initialize. When MAC-based authentication
State
is enabled on the port, this parameter is deprecated.
Quiet Period The timer used by the authenticator state machine on this port to define periods of time in
which it will not attempt to acquire a supplicant. The value is expressed in seconds and
will be in the range 0 and 65535.
Transmit Period The timer used by the authenticator state machine on the specified port to determine
when to send an EAPOL EAP Request/Identity frame to the supplicant. The value is
expressed in seconds and will be in the range of 1 and 65535.
Guest-VLAN ID The guest VLAN identifier configured on the interface.
Guest VLAN The time in seconds for which the authenticator waits before authorizing and placing the
Period
port in the Guest VLAN, if no EAPOL packets are detected on that port.
Supplicant The timer used by the authenticator state machine on this port to timeout the supplicant.
Timeout
The value is expressed in seconds and will be in the range of 1 and 65535.
Server Timeout The timer used by the authenticator on this port to timeout the authentication server. The
value is expressed in seconds and will be in the range of 1 and 65535.
Maximum The maximum number of times the authenticator state machine on this port will
Requests
retransmit an EAPOL EAP Request/Identity before timing out the supplicant. The value
will be in the range of 1 and 10.
VLAN Id The VLAN assigned to the port by the radius server. This is only valid when the port
control mode is not Mac-based.
VLAN Assigned The reason the VLAN identified in the VLAN Idfield has been assigned to the port.
Reason
Possible values are RADIUS, Unauthenticated VLAN, Guest VLAN, default, and Not
Assigned. When the VLAN Assigned Reason is 'Not Assigned't, it means that the port
has not been assigned to any VLAN by dot1x. This only valid when the port control mode
is not MAC-based.
Reauthenticatio The timer used by the authenticator state machine on this port to determine when
n Period
reauthentication of the supplicant takes place. The value is expressed in seconds and
will be in the range of 1 and 65535.
Reauthenticatio Indicates if reauthentication is enabled on this port. Possible values are 'True" or "False".
n Enabled
Key Indicates if the key is transmitted to the supplicant for the specified port. Possible values
Transmission
are True or False.
Enabled
Control The control direction for the specified port or ports. Possible values are both or in.
Direction
Switching Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
3-74