NETGEAR GSM7228PS Cli Manual page 613

Parameter Definition
Intf The interface that the packet came in or went out on. Format used is unit/slot/port (internal
interface number).
SrcIp The source IP address in the IP header of the packet.
DestIp The destination IP address in the IP header of the packet.
AreaId The area ID in the OSPF header of the packet.
Type Could be one of the following:
HELLO – Hello packet
DB_DSCR – Database descriptor
LS_REQ – LS Request
LS_UPD – LS Update
LS_ACK – LS Acknowledge
The remaining fields in the trace are specific to the type of OSPF Packet.
HELLO packet field definitions:
Parameter Definition
Netmask The netmask in the hello packet.
DesignRouter Designated Router IP address.
Backup Backup router IP address.
DB_DSCR packet field definitions:
Field Definition
MTU MTU
Options Options in the OSPF packet.
Flags Could be one or more of the following:
• I – Init
• M – More
• MS – Master/Slave
Seq Sequence Number of the DD packet.
LS_REQ packet field definitions.
Field Definition
Length Length of packet
Utility Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
9-76