Area Nssa Default-Info-Originate (Ospfv); Area Nssa No-Redistribute (Ospfv) - NETGEAR GSM7228PS Cli Manual

area nssa default-info-originate (OSPFv3)
This command configures the metric value and type for the default route advertised into the
NSSA. The optional metric parameter specifies the metric of the default route and is to be in a
range of 1-16777214. If no metric is specified, the default value is 10. The metric type can be
comparable (nssa-external 1) or non-comparable (nssa-external 2).
Format
area <areaid> nssa default-info-originate [<metric>] [{comparable |
non-comparable}]
Mode Router OSPFv3 Config
no area nssa default-info-originate (OSPFv3)
This command disables the default route advertised into the NSSA.
Format
no area <areaid> nssa default-info-originate [<metric>] [{comparable
| non-comparable}]
Mode Router OSPF Config
area nssa no-redistribute (OSPFv3)
This command configures the NSSA ABR so that learned external routes will not be redistributed
to the NSSA.
Format
area <areaid> nssa no-redistribute
Mode Router OSPFv3 Config
no area nssa no-redistribute (OSPFv3)
This command disables the NSSA ABR so that learned external routes are redistributed to the
NSSA.
Format
no area <areaid> nssa no-redistribute
Mode Router OSPF Config
IPv6 Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
7-39