NETGEAR GSM7228PS Cli Manual page 665

no aaa authenticaton login
This command is used to remove authentication at login. .
Format
no aaa authentication login {default | list-name}
Mode Global Config
aaa authenticaton enable
This command is used to set authentication when the user access higher privilege level,
use the
aaa authentication enable default
The default and optional list names that you create with the
command are used with the
enable
Create a list by entering the
command where
list-name
argument identifies the list of methods that the authentication algorithm tries, in the given
sequence. The additional methods of authentication are used only if the previous method
returns an error, not if it fails. To ensure that the authentication succeeds even if all
methods return an error, specify
example, if is specified as an authentication method after
none
is used if the radius server is down. All
sent by the switch to a RADIUS or TACACS server include the username "
where is the requested privilege level.
x
.
Format
aaa authentication enable {default | list-name} method1 [method2...]
Mode Global Config
Default Uses the listed authentication methods that follow this argument as the default
list of methods when a user accesses a higher privilege level.
list-name Character string used to name the list of authentication methods activated when
a user accesses a higher privilege level. Up to 12 characters.
method1 [method2...] At least one from the following table:
Keyword
enable
Management Commands
enable authentication
aaa authentication enable list-name method
is any character string used to name this list. The
as the final method in the command line. For
none
aaa authentication enable default
Description
Uses the enable password for authentication.
v1.0, July 2010
Managed Switch CLI Manual, Release 8.0.3
command in global configuration mode.
aaa authentication
command.
radius
method
, no authentication
requests
.",
$enabx$
10-38