Show Service-Policy (Gsm7248 Only); Mac Access Control List (Acl) Commands (Gsm7248 Only) - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Direction
Operational
Status
Policy Name
The following information is repeated for each class instance within this policy:
Class Name
In Discarded
Packets

14.6.7 show service-policy (GSM7248 only)

This command displays a summary of policy-oriented statistics information for all
interfaces in the specified direction.
Format
Mode
The following information is repeated for each interface and direction (only those
interfaces configured with an attached policy are shown):
Interface
Operational
Status
Policy Name
14.7 MAC Access Control List (ACL) Commands (GSM7248
only)
This section describes the commands you use to configure MAC ACL settings. MAC
ACLs ensure that only authorized users have access to specific resources and block any
unwarranted attempts to reach network resources.
The following rules apply to MAC ACLs:
• The maximum number of ACLs you create is 100, regardless of type.
Quality of Service (QoS) Commands
The traffic direction of this interface service.
The current operational status of this DiffServ service inter-
face.
The name of the policy attached to the interface in the indi-
cated direction.
The name of this class instance.
A count of the packets discarded for this class instance for
any reason due to DiffServ treatment of the traffic class.
show service-policy in
Privileged EXEC
Valid slot and port number separated by forward slashes.
The current operational status of this DiffServ service inter-
face.
The name of the policy attached to the interface.
v1.0, March 2006
14-27