NETGEAR GSM7228PS Cli Manual page 238

dos-control icmpv6
This command enables Maximum ICMPv6 Packet Size Denial of Service protections. If the mode
is enabled, Denial of Service prevention is active for this type of attack. If ICMPv6 Echo Request
(PING) packets ingress having a size greater than the configured value, the packets will be
dropped if the mode is enabled. This command is only available on FSM72xxRS switches.
Default disabled <512>
Format
dos-control icmpv6 <0-16384>
Mode Global Config
no dos-control icmpv6
This command disables Maximum ICMP Packet Size Denial of Service protections. This
command is only available on FSM72xxRS switches.
Format
no dos-control icmpv6
Mode Global Config
dos-control icmpfrag
This command enables ICMP Fragment Denial of Service protection. If the mode is enabled,
Denial of Service prevention is active for this type of attack. If packets ingress having fragmented
ICMP packets, the packets will be dropped if the mode is enabled. This command is only available
on FSM72xxRS switches.
Default disabled
Format
dos-control icmpfrag
Mode Global Config
no dos-control icmpfrag
This command disabled ICMP Fragment Denial of Service protection. This command is only
available on FSM72xxRS switches.
Switching Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
3-202