Vlan Tagging; Vlan Association Subnet - NETGEAR GSM7228PS Cli Manual

vlan tagging

This command configures the tagging behavior for a specific interface in a VLAN to enabled. If
tagging is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is
transmitted as untagged frames. The vlan-list contains VlanId's in range <1-4093>. Separate non-
consecutive IDs with ',' and no spaces and no zeros in between the range; Use '-' for range.
Format
vlan tagging <vlan-list>
Mode Interface Config
no vlan tagging
This command configures the tagging behavior for a specific interface in a VLAN to disabled. If
tagging is disabled, traffic is transmitted as untagged frames. The vlan-list contains VlanId's in
range <1-4093>. Separate non-consecutive IDs with ',' and no spaces and no zeros in between the
range; Use '-' for range.
Format
no vlan tagging <vlan-list>
Mode Interface Config

vlan association subnet

This command associates a VLAN to a specific IP-subnet.
Format
vlan association subnet <ipaddr> <netmask> <1-4093>
Mode VLAN Config
no vlan association subnet
This command removes association of a specific IP-subnet to a VLAN.
Format
no vlan association subnet <ipaddr> <netmask>
Mode VLAN Config
Switching Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
3-41