no ip mtu
This command resets the ip mtu to the default value.
Format
no ip mtu <mtu>
Mode
Interface Config
encapsulation
This command configures the link layer encapsulation type for the packet. The encapsulation type
can be ethernet or snap.
Default
ethernet
Format
encapsulation {ethernet | snap}
Mode
Interface Config
Note: Routed frames are always ethernet encapsulated when a frame is routed to a
VLAN.
clear ip route all
This command removes all the route entries learned over the network.
Format
clear ip route all
Mode
Privileged EXEC
Protocol
Tells which protocol added the specified route. The possibilities are: local, static, OSPF, or
RIP.
Total Number
The total number of routes.
of Routes
show ip brief
This command displays all the summary information of the IP, including the ICMP rate limit
configuration and the global ICMP Redirect configuration.
Routing Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
4-13