Portcfgdefault - Brocade Communications Systems 8 Command Reference Manual

2

portCfgDefault

portCfgDefault
Resets the port configuration to factory default values.
Synopsis portcfgdefault [slot/][ge]port
Description Use this command to reset all configuration values on a specified port to their factory defaults. This
command persistently disables ports capable of routing, which is the factory default value. Use the
portCfgShow command to display the port configuration.
This command does not change the state of a port. To change the state of an E_Port, use either
switchDisable/switchEnable or portDisable/portEnable.
When issued on a Brocade 8000 in Access Gateway mode, this command resets the buffer limited
mode on all N_Ports. It also returns the maximum NPIV per port login limit to the default value of
126 on all ports, including FCoE ports.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
slot
port
Examples To reset a port to factory defaults:
To reset a GbE port to factory defaults:
To reset a an FCoE port on a Brocade 8000 in Access Gateway mode:
See Also portCfgEport, portCfgGport, portCfgLongDistance, portCfgLport, portCfgPersistentDisable,
portCfgPersistentEnable, portCfgShow, portCfgSpeed, portCfgTrunkPort
642
For bladed systems only, specifies the slot number of the port to be reset,
followed by a slash (/).
Specifies the number of the port to be reset, relative to its slot for bladed
systems. Use switchShow to list of valid ports.
switch:admin> portcfgdefault 1/3
switch:admin> portcfgdefault 8/ge1
switch:admin> portcfgdefault 13
switch:admin> portcfgshow
Area Number:
Speed Level:
Fill Word:
Trunk Port
Locked N_Port
Persistent Disable
LOS TOV enable
NPIV capability
QOS Port
Port Auto Disable:
Rate Limit
F_Port Buffers
NPIV PP Limit:
13
AUTO(HW)
0(Idle-Idle)
ON
OFF
OFF
OFF
ON
AE
OFF
OFF
OFF
126
Fabric OS Command Reference
53-1001764-02