Changing System Information - 3Com WX1200 Reference Manual

6 Optionally, in the Offset Minutes box, select the number of minutes
7 In the DST Name box, type the name for the summertime offset (1 to 16
8 In the Start Month list, select the month of the year when the time
9 In the Start Week list, select the week of the month when the time
10 In the Start Day list, select the day of the week when the time change
11 In the Start Hour box, specify the hour (between 0 and 23) to start the
12 In the Start Minute box, specify the minute (between 0 and 59) when the
13 In the End Month list, select the month of the year when the time change
14 In the End Week list, select the week of the month when the time change
15 In the End Day list, select the day of the week when the time change
16 In the End Hour box, specify the hour (between 0 and 23) when the time
17 In the End Minute box, specify the minute (between 0 and 59) when the
18 Click OK.
Changing System
Information
1 Select the Configuration tool bar option.
2 In the Organizer panel, select the WX switch.
3 In the Task List panel, select System Information.
4 In the Contact box, type the contact name for the WX.
5 In the Location box, type the location of the WX.
(between -59 to 59) to subtract from or add to UTC.
alphanumeric characters, with no spaces or tabs).
change starts.
change starts (First, Second, Third, Fourth, or Last).
starts.
time change.
time change starts.
ends.
ends (First, Second, Third, Fourth, or Last).
ends.
change ends.
time change ends.
To change system information:
The System Information wizard appears.
Modifying Basic Switch Parameters 175