Sending The Information To The Log Buffer - 3Com Switch 4500 26-Port Configuration Manual

268 C 15: S
HAPTER YSTEM
Sending the Information
to the Log Buffer
M D
AINTENANCE AND EBUGGING
Operation
Output time-stamp is disabled
4 Enabling terminal display function
To view the output information at the Telnet terminal or dumb terminal, you must
first enable the corresponding log, debugging and trap information functions at
the Switch.
For example, if you have set the log information as the information sent to the
Telnet terminal or dumb terminal, you need to use the
command to enable the terminal display function of log information on the
Switch, then you can view the information at the Telnet terminal or dumb
terminal.
Perform the following operation in User View.
Table 298 Enabling Terminal Display Function
Operation
Enable terminal display function of log, debugging
and trap information
Disable terminal display function of the above
information
Enable terminal display function of debugging
information
Disable terminal display function of debugging
information
Enable terminal display function of log information
Disable terminal display function of log information
Enable terminal display function of trap information
Disable terminal display function of trap information undo terminal trapping
To send information to the log buffer, follow the steps below:
1 Enabling info-center
Perform the following operation in System View.
Table 299 Enabling/Disabling Info-center
Operation
Enable info-center
Disable info-center
Info-center is enabled by default. After info-center is enabled, system
performances are affected when the system processes much information because
of information classification and outputting.
2 Configuring to output information to the log buffer
Perform the following operation in System View.
Command
undo info-center timestamp { log |
trap | debugging }
Command
info-center enable
undo info-center enable
terminal logging
Command
terminal monitor
undo terminal monitor
terminal debugging
undo terminal debugging
terminal logging
undo terminal logging
terminal trapping