Setting To Output System Information To The Log Buffer; Setting To Output System Information To The Snmp Nms - 3Com E4500-24 Cli Configuration Manual

To do...
Enable system
information output to the
trap buffer
Configure the output
rules of system
information
Set the format of time
stamp in the output
information

Setting to Output System Information to the Log Buffer

Follow these steps to set to output system information to the log buffer:
To do...
Enter system view
Enable the information
center
Enable information
output to the log buffer
Configure the output
rules of system
information
Set the format of time
stamp in the output
information

Setting to Output System Information to the SNMP NMS

Follow these steps to set to output system information to the SNMP NMS:
To do...
Enter system view
Enable the information
center
Use the command...
info-center trapbuffer [channel
{ channel-number | channel-name } |
size buffersize]*
info-center source { modu-name |
default } channel { channel-number |
channel-name } [ { log | trap | debug }
{ level severity | state state } ]*
info-center timestamp { log | trap |
debugging } { boot | date | none }
Use the command...
system-view
info-center enable
info-center logbuffer [ channel
{ channel-number |
channel-name } | size buffersize ]*
info-center source { modu-name |
default } channel
{ channel-number |
channel-name } [ { log | trap |
debug } { level severity | state
state } ]*
info-center timestamp { log | trap
| debugging } { boot | date |
none }
Use the command...
system-view
info-center enable
1-13
Remarks
Optional
By default, the switch uses
information channel 3 to output
trap information to the trap
buffer, which can holds up to
256 items by default.
Optional
Refer to Table 1-4 for the
default output rules of system
information.
Optional
By default, the time stamp
format of the output trap
information is date.
Remarks
—
Optional
Enabled by default.
Optional
By default, the switch uses
information channel 4 to output log
information to the log buffer, which
can holds up to 512 items by
default.
Optional
Refer to Table 1-4 for the default
output rules of system information.
Optional
By default, the time stamp format
of the output log information is
date.
Remarks
—
Optional
Enabled by default.