COBHAM Satcom EXPLORER 540 User & Integrator's Manual page 95

4.13.3 To restore factory settings
To restore the factory settings of the EXPLORER 540, do as follows:
1. Under Advanced, select Factory reset.
Important
2. Click OK.
The terminal will now restart and start up with the factory settings. The installation
process is also restarted.
4.13.4 SIM PIN for BGAN
To enable or disable the use of a SIM PIN
To enable or disable the use of a PIN to access the BGAN network, do as follows:
1. Under Advanced, select SIM.
2. Select Enable/disable SIM PIN.
3. Under Enable/Disable PIN select or clear the box next to Require PIN on startup.
• If you clear the box, you can access and use the terminal without entering a PIN
• If you select the box, you must enter a PIN on startup before you can make calls
or data sessions
4. If you selected Require PIN on startup, type in the PIN next to Enter current PIN.
5. Click Save.
The new PIN settings will take effect at next power on.
To change the SIM PIN
To change the PIN used to access the BGAN network, do as follows:
1. Under Advanced, select SIM.
2. Select Change SIM PIN.
Note
3. Under Change PIN type in the Current PIN.
4. Type in the New PIN and retype it on the next line.
5. Click Save. The new PIN settings will take effect at next power on.
98-148232-K
All configuration will be lost and the EXPLORER 540 will return to the
default configuration.
The SIM PIN must be enabled before you can change it.
Chapter 4: Configuration with web interface
Advanced settings
4-31