COBHAM Satcom EXPLORER 540 User & Integrator's Manual page 166

B.2.3 SMS reject responses
Reject Response SMS
ACT/DEACT PARM PROBLEM
ATCO ERROR
COMMAND NOT SUPPORTED
ERROR: TERMINAL BUSY
INVALID RESTART REQUEST
INVALID WANMODE REQUEST
INVALID WATCHDOG PING ADDRESS
INVALID WATCHDOG PING FREQUENCY
INVALID WATCHDOG REQUEST
WRONG CONNECTION TYPE(NO DHCP TE)
WRONG CONNECTION TYPE(NO STATIC TE) No Static TEs added in Terminal settings.
WRONG CONNECTION TYPE(NO TEs)
WRONG PASSWORD
WRONG QOS
98-148232-K
Possible Cause
The <IP addr> provided for an ACTIVATE or
DEACTIVATE command is incorrect (for ACTIVATE, it
must be in same subnet as the EXPLORER 540 IP and
not be the EXPLORER 540 IP; for DEACTIVATE, it must
exist as a local or global IP address in the existing
PDP table).
Unable to send AT command to ATC handler.
Attempt to use an SMS command not supported by
the EXPLORER 540.
An ACTIVATE or DEACTIVATE command is in
progress.
Attempt to perform restart before EXPLORER 540
has been running for at least 15 minutes.
The requested WAN mode is not supported by the
EXPLORER 540, or invalid parameters are used.
Entered Ping address is out of range (0.0.0.0 –
255.255.255.254).
Requested Ping Frequency is less than the minimum
(5 minutes).
"Ping required" or "wdog enabled" fields incorrect in
remote SMS message, or watchdog request other
than "get" attempted.
No DHCP TEs connected to the Remote Unit.
No TEs are connected to the Remote Unit.
Authentication Failure.
Invalid QoS Requested (only a QoS of 1 is valid).
Appendix B: Command reference
SMS remote commands
B-8