COBHAM Satcom EXPLORER 540 User & Integrator's Manual page 40

CLEAR: Delete SMS messages in the EXPLORER 540
The text in the CLEAR SMS must have the following format:
CLEAR <category> SMS <rsms_pwd>
Example: To delete all SMS messages from the EXPLORER 540, send an SMS to the
Response:
No response is sent for this command.
GETINFO: Get information from the EXPLORER 540
The text in the GETINFO SMS must have the following format:
GETINFO <info_mode> {GPS|ALL|USAGE} <rsms_pwd>
Example: To request all information with titles, send an SMS with the text:
Response: The response depends on the requested format (GPS/ALL/USAGE) and info
mode. For the command in the example, the response would have the titles shown
below.
Example: IMSI: 901112112456789
The Uptime is in seconds, and GIP is the global IP address of the first active PDP
context (BGAN or cellular, depending on the network in use).
Note
RESTART: Restart the EXPLORER 540
The text in the RESTART SMS must have the following format:
RESTART 1 BGAN <rsms_pwd>
Example: To restart the EXPLORER 540, send an SMS with the text:
Response:
No response is sent for this command.
98-148232-K
SMS-Free: 77/100
WARNING: Ensure SMS-free > 5. Cleanup old msgs for
orderly remote-SMS-control
terminal with the text: CLEAR 4 SMS remote
GETINFO 1 ALL remote
IMEI: 35393803001003
LAT: 32.89495
LON:-117.20205
SW: 1.0
C/N0: 66
Beam: 84
Uptime: 59483
GIP: 161.30.23.43
You may not be able to access a private cellular IP address. If you use PRISM
instead, it will give you the same IP address regardless of the network used
(BGAN or cellular).
RESTART 1 BGAN remote
Chapter 3: Operation
To access the terminal from a remote location
3-6