COBHAM Satcom EXPLORER 540 User & Integrator's Manual page 137

LED light pattern after installation
Light pattern
Green flashing rapidly
Yellow flashing rapidly
Off
Event messages and status messages
In the web interface of the EXPLORER 540 you can see status messages and alerts that
are currently active.
When a warning or error event is active, the web interface shows a warning symbol
Select it to see a list of currently active alerts.
5.5.3 List of messages
The following list explains some of the messages that may show in the web interface of
the EXPLORER 540.
Event ID
Displayed text
(Hex)
Temperature too low
1010
(critical)
Too low temperature
1020
warning
Temperature too
1110
high (critical)
Too high
1120
temperature warning
98-148232-K
Meaning
Starting up.
Closing down.
Power off or normal function after installation is completed.
Explanation
Low ambient temperature
is causing the performance
of the terminal to be
degraded or halted.
Low ambient temperature
is causing the performance
of the terminal to be
degraded or halted.
Terminal: Critically high
temperature is causing the
terminal to shut down.
Antenna: Critically high
temperature is causing the
antenna to stop
transmission.
High ambient temperature
is causing the performance
of the system to be
degraded or halted. The bit
rate is reduced.
Chapter 5: Maintenance and troubleshooting
Troubleshooting
Remedy
Move the terminal to a
warmer location. For
information on ambient
temperature limits, see the
Specifications appendix.
Move the terminal to a
warmer location. For
information on ambient
temperature limits, see the
Specifications appendix.
If possible, move the failing
unit to a cooler location.
For information on
ambient temperature, see
the Specifications
appendix.
Contact your distributor if
the problem persists.
Move the terminal to a
cooler location. For
information on ambient
temperature limits, see the
Specifications appendix.

.
5-10