COBHAM Satcom EXPLORER 540 User & Integrator's Manual page 91

4.12.4 To update software
To update the software in the EXPLORER 540 using the web interface, do as follows:
1. Download the new software
save it on your computer.
2. Open the web interface and enter the Control panel
3. Click Support > Update software.
4. Click Update software...
5. Browse to the new software version and click Open. The software file has the
extension ".tiif".
6. The terminal restarts and completes the software update.
Note
You can check the software version under Control panel > Support > About.
4.12.5 To reset the administrator password
If you have forgotten the administrator password, do as follows:
Note
1. Contact your supplier for a reset code.
Report the serial number and IMEI number of the terminal.
You can find the serial number and the IMEI number under Control panel >
Support > About.
2. After receiving the reset code from your supplier, select Reset password from the
Support page.
3. Type in the reset code obtained from your supplier and click Reset.
4. The password is reset to admin.
1. You can download the software from the "Cobham SYNC Partner Portal" at
www.cobhamsatcom.com
Locate the EXPLORER 540 software.
98-148232-K
The update procedure takes some minutes to complete. If the installation
process is not yet completed, the LED flashes blue during the software
update.
If you have physical access to the EXPLORER 540, you can also use the Reset
button. For details, see Reset button on page 5-4.
, select
Chapter 4: Configuration with web interface
1
or acquire the software from Cobham SATCOM and
Cobham SYNC Partner Portal > Downloads.
Support features

.
4-27