COBHAM Satcom EXPLORER 540 User & Integrator's Manual page 103

4.13.10 Call charges (BGAN only)
Note
If you know the tariff for your subscribed BGAN services, you can enter these tariffs in
the web interface and automatically calculate the estimated charges for your calls and
data sessions. To enter the call tariffs, do as follows:
1. Under Advanced, select Call Charges.
2. Select the currency from the Displayed currency drop-down list.
3. Enter the tariff for each of the services.
4. Click Save. The entered tariffs are used for estimating the charges for calls and data
sessions. For further information, see Call log (Non-M2M only) on page 4-14.
4.13.11 Remote management
You can set up the terminal so that it can be controlled from a remote location.
To set up the terminal for remote management, select Advanced > Remote
management from the Control panel.
98-148232-K
Thrane & Thrane A/S does not take responsibility for the correctness of the
estimated charges. This calculation is only a rough estimate of the charge,
based on the tariff entered by the user. Also, the Airtime Provider may have
different methods of measuring the airtime used.
Chapter 4: Configuration with web interface
Advanced settings
4-39