COBHAM Satcom EXPLORER 540 User & Integrator's Manual page 61

3.8.2 Log file(s)
Using AT commands, you can command the EXPLORER 540 to send the following log
files to an FTP server:
• Diagnostics report: diagreport.tar.gz. A report containing useful information for
troubleshooting (includes the logs below as well as other information).
• Event log: event.csv. A log of events that are signaled to the user.
• System log: syslog.log. A log of internal events in the EXPLORER 540.
• AT command log: at_log.txt. A log of all AT commands sent and received by the
EXPLORER 540 and SMS commands with responses.
To command the EXPLORER 540 to send a log file to an FTP server, do as follows:
1. To access the EXPLORER 540, use one of the following:
• a computer connected to the Internet, see Remote access with AT commands on
page 3-10, or
• equipment connected to a cellular network, see Remote access with SMS on
page 3-4.
Note that you need a password for both access methods. For AT commands, use
the AT_ICLCK command with the admin password, for SMS, use the remote SMS
password.
2. Send the command _ISENDFILE to the EXPLORER 540 to make it send a log file to
the specified destination on your FTP server.
Example: _ISENDFILE="/","syslog.log","ftpdirectory",
In this example. the terminal will look for a file named syslog.log in the local
directory / in the terminal, and send the file to the directory ftpdirectory on the
FTP server named ftp.myftpserver.com. The user name ftp-username and
password ftp-password give access to the FTP server. The APN is left out to
indicate that the default APN is used.
3. You get a response command that the file was transferred successfully.
Example: _ISENDFILE: 0, Complete
Using the web interface you can see the Event log and create a diagnostics report. See
Log files on page 5-16.
98-148232-K
"ftp.myftpserver.com","ftp-username","ftp-
password"
Chapter 3: Operation
File transfer
3-27