The Control Panel; To Restart The Installation Process (Bgan) - COBHAM Satcom EXPLORER 540 User & Integrator's Manual

• Originator: The phone number from which the call was made.
• Receiver: The phone number that receives the call.

4.5 The Control panel

The Control panel is used for accessing the settings and functions of your
EXPLORER 540.
To open the Control panel, click
Note

4.6 To restart the installation process (BGAN)

If you need to restart the installation process, e.g. because the EXPLORER 540 has been
moved to another location, click the Installation tile in the Control panel. This will
reboot the terminal and restart the installation process. For details about the
installation process, see Installation process on page 2-6.
To start the installation process from the web interface, do as follows:
1. Select
98-148232-K
IP handsets: The M2M subscription does not support Voice over IP (VoIP). For
details on VoIP and voice calls with BGAN class 2 subscription, see Appendix
C, BGAN non-M2M functions.

(Control panel) and then Installation.
Chapter 4: Configuration with web interface

from the bottom right corner of the web interface.
The Control panel
4-12