The Web Interface - COBHAM Satcom EXPLORER 540 User & Integrator's Manual

4.1 The web interface

4.1.1 What is the web interface?
The web interface is built into the terminal and is used for operating, setting up and
configuring the system.
You can access the web interface from a computer with a standard Internet browser.
4.1.2 To access and navigate the web interface
To access the web interface
To access the web interface, do as follows:
1. Start up the terminal.
2. Connect your computer to the terminal.
You can connect locally to the LAN interface or use a remote connection.
3. Open your browser and enter the IP address of the terminal in the address bar.
For local connection, the default IP address of the terminal is 192.168.0.1.
For remote connection, see Remote access with the web interface on page 4-39.
4. If you have an M2M subscription, you must log in to access the web interface, see
next step.
If you have a non-M2M subscription, the web interface will now open to the
Dashboard page and you will have normal User access.
5. Enter user name and password. You can log in as user or as administrator.
• Default for user: User id = user, Password = <serial number of the EXPLORER 540>
• Default for admin: User id = administrator, Password = admin
Note
Note
If the installation process is ongoing, the web interface will show a popup window with
the progress of the installation process.
You can change the language to French, German, Russian, Spanish, Chinese or
Japanese. See To select the language on page 4-18.
98-148232-K
If you enter a wrong password 5 times in a row, you are locked out for 15
minutes (other users can still access the login page). After 15 minutes you
can try again.
Some parts of the web interface may not be accessible if the user permissions
are limited. For information on how to set up user permissions, see To set up
user permissions on page 4-30.
Chapter 4: Configuration with web interface
The web interface
4-2