COBHAM Satcom EXPLORER 540 User & Integrator's Manual page 71

4. If your APN uses a password, type in the User name and Password provided from
the Airtime Provider.
5. Click Save.
4.3.3 Automatic Context Activation (ACA)
To enable Automatic Context Activation of your Standard data connection, do as
follows:
1. From the Dashboard, click
package that you want to change.
2. Select Parameters.
3. Select Automatic Context Activation (ACA) of Standard data.
• When you select ACA, the data connection is automatically established after
restart as soon as the EXPLORER 540 and its BGAN connection are ready.
This setting is mandatory when the terminal is in one of the Cellular modem
preferred modes.
Note
• When you disable ACA, you can control the data connection manually from the
startup page
4.3.4 To create a new connection package
Note
Do as follows:
1. Click New connection package.
2. Type a Name for the new package.
3. If you want to create dedicated connections, select the Type. For details on
dedicated connections, see To set up dedicated connections on page 4-9.
4. Click Save
5. Click Click here to create connections.
98-148232-K

You are charged for the data transferred. You may want to disable
automatic updates in your LAN device to avoid unnecessary charges.

or with the SMS command ACTIVATE.
You must be logged in as administrator to be able to create connection
packages.
Chapter 4: Configuration with web interface
To set up your data connection packages (BGAN M2M)
in the right side of the tile with the connection
4-7