Advanced Settings - COBHAM Satcom EXPLORER 540 User & Integrator's Manual

4.13 Advanced settings

4.13.1 Passwords
The EXPLORER 540 web interface is password protected at two levels: A user password
and an administrator password. You will always be prompted for a password when you
access the web interface. Default settings are:
• User: User name: user, Password: <serial number of the EXPLORER 540>
• Administrator: User name: administrator, Password: admin
You can change the passwords if you are logged in as administrator, see the next
sections.
Important
To log in as administrator
Access to the Advanced settings requires an administrator password. If you are already
logged in as user and you want to access the Advanced settings, do as follows:
1. From the Control panel
If you are not logged in as administrator you are now prompted to log in.
2. Enter the administrator password.
If you have forgotten the administrator password, you can reset the password. For
details, see To reset the administrator password on page 4-27. The old user name
and password will apply until you have finished the reset procedure.
3. Click OK.
To change the user password
To change the user password, do as follows:
1. Log in as administrator.
2. Under Advanced, select Passwords.
3. Select Change user password.
4. Type in the User id (default: user).
5. Type in the New password and retype it on the next line.
6. Click Save.
At the next login the new password is required.
98-148232-K
Change the administrator password immediately after first login!

, select Advanced.
Chapter 4: Configuration with web interface
Advanced settings
4-29