COBHAM Satcom EXPLORER 540 User & Integrator's Manual page 182

Parameter Values
<port> <port number>
<signal strength> 0
1
2...30 = -109 to -53 dBm
31
99
<switch_mode> 0: Switch immediately
1: Only switch when link is inactive
(default)
<test_ip> <IP address for PRISM test>
98-148232-K
= -113 dBm or less
= -111 dBm
= -51 dBm or greater
= not known or not detectable
Appendix B: Command reference
Meaning
The port used to connect to the PRISM server.
The backup server (<n> = 2) has port number
6666 by default.
Shows the signal strength of the cellular
connection.
Determines if a switch to the primary
connection is allowed while there is traffic on
the backup link. (cutoff point is at 5kb within 2
minutes).
The switch is delayed no more than 30
minutes.
PRISM test IP address. Used to test whether
BGAN or LTE has IP connectivity.
Starts after LTE/BGAN is up simultaneously
with server connect attempts.
Uses 3 pings with 10 seconds between them.
Default value is no ip address.
To clear a previously defined entry, use value
0.0.0.0
AT commands
B-24