COBHAM Satcom EXPLORER 540 User & Integrator's Manual page 180

Parameter Values
<4g> 0 = 4G Not allowed
1 = 4G Allowed
<access tech> AUTO
GSM (Telit EU, Telit GLOBAL,
Quectel)
UMTS (Telit GLOBAL)
LTE
LTE-M (Quectel)
NB-IOT (Quectel)
<active>
<bgan> 0: Unknown / Down
1: Up
<boot_delay> 0 (immediately) to 604800 seconds
(7 days).
<cell> 0: Unknown / Down
1: Link up
<conn_delay> 0 (immediately) to 86400 seconds
(24 hours)
<connect_wait_time 0 to 3600 seconds.
>
Value 0 indicates that the secondary
link is connected immediately.
Default is 300 seconds.
<disc_wait_time> 0 to 3600 seconds.
Value 0 indicates that the secondary
link is disconnected immediately.
Default is 300 seconds.
<dns1> DNS 1 IP address.
To delete the entry, enter address
0.0.0.0
98-148232-K
(Telit EU)
0: None / Unknown
1: BGAN
2: Cellular Modem
3: External Modem
Appendix B: Command reference
Meaning
Only to be used with the "old" EXPLORER 540
LTE Modem (P/N 403715A-101/102).
Skip this parameter if you are using the new
EXPLORER 540 Cellular Modem (P/N 403715A-
00212/00214/00215)
Select the technology to use. Note that the
selected technology must be supported by the
installed cellular modem.
If you select Auto, the EXPLORER 540 will select
a technology based on the abilities of the
installed modem.
Identifies which of the available connections
are active.
Link status of the BGAN connection.
Boot delay period, time from loss of PRISM
connection to a forced reboot.
Link status of the Cellular Modem connection.
Connection delay period, time before initiating
a new connect when connection to the PRISM
server has failed. This value is only used if:
- Test ip is specified and the ping is successful
- No test IP is specified
Only applicable for link_mode = 0 (connected
when needed).
Wait time for connecting the backup link after
the primary link has been discovered to be
down.
Only applicable for link_mode = 0.
Wait time for disconnecting the backup link
after the primary link has been discovered to
be up.
DNS address 1 (primary server) of the
externally connected modem in dot-decimal
notation.
AT commands
B-22