COBHAM Satcom EXPLORER 540 User & Integrator's Manual page 105

2. Enter the password for remote SMS. It can be 5 to 15 characters long. The
characters 0-9, a-z and A-Z are allowed. The password is mandatory. This
password must be entered every time you send an SMS command. Default
password is remote.
Important
3. Clear the box Trust all phone numbers and enter at least one trusted mobile
number from which the terminal accepts an SMS. Use the wild card * to accept a
range of trusted numbers.
Entered mobile number with wild card
+453955880*
+45395588*
4. To add more phone numbers, click Add phone number again.
5. Click Save.
For information on how to send SMS commands, see Remote access with SMS on
page 3-4.
4.13.12 Remote control of tracking
When you are using the tracking function of the EXPLORER 540, you can set up the
terminal so that the tracking server can access the EXPLORER 540 e.g. to start or stop
tracking or to change reporting intervals.
To allow the tracking server to control the tracking settings, do as follows:
1. Under Advanced, select Tracking settings.
2. Select Allow remote control of tracking.
3. Click Save.
The EXPLORER terminal will now accept commands from the specified tracking server,
for example to change reporting intervals or start/stop reporting.
98-148232-K
Change the password in order to keep the terminal protected.
Chapter 4: Configuration with web interface
Mobile numbers accepted
+4539558800 to +4539558809
+4539558800 to +4539558899
Advanced settings
4-41