COBHAM Satcom EXPLORER 540 User & Integrator's Manual page 116

To disable the use of a SIM PIN
To disable the use of a PIN to access the cellular network, do as follows:
1. Under Advanced, select EXPLORER Cellular Modem.
2. Select Enable/disable SIM PIN.
3. Under Enable/Disable PIN clear the box next to Require PIN on startup.
• If you clear the box, you can access and use the terminal without entering a PIN.
Recommended for M2M operation!
• If you select the box, you must enter a PIN before you can use the cellular
network.
4. If you selected Require PIN on startup, type in the PIN next to Enter current PIN.
5. Click Save. The new PIN settings will take effect at next power on.
To change the SIM PIN
To change the PIN used to access the cellular network, do as follows:
1. Under Advanced, select EXPLORER Cellular Modem.
2. Select Change SIM PIN.
3. Under Change PIN type in the Current PIN.
4. Type in the New PIN and retype it on the next line.
5. Click Save. The new PIN settings will take effect at next power on.
98-148232-K
Optional: To set up cellular network for data (dual mode)
Chapter 4: Configuration with web interface 4-52