COBHAM Satcom EXPLORER 540 User & Integrator's Manual page 117

To set up the cellular network settings
1. Under Advanced, select EXPLORER Cellular Modem.
2. Select Advanced modem settings.
3. Select the Network operator mode.
• SIM default: The cellular modem uses the operator from the SIM card.
• Locked to operator: Type in the MCC and MNC for the operator you want to use.
The cellular modem will only use this operator.
4. Type in the Connection ID (CID) for the cellular connection.
Note
5. At Network type, select the preferred cellular network type (2G (GSM), LTE-M, NB-
IoT, 3G (UMTS), 4G (LTE)), or select Automatic to let the terminal find the network
suitable for your installation. Note that the selected network must be supported by
the embedded 3rd party modem and the service provider.
For details, see Optional EXPLORER 540 Cellular Modem on page A-10.
6. If the installed modem is a TC1NAG or TC4NAG, select which operator you are using
(AT&T or Verizon).
Important
For other types of modem, the operator is fixed and cannot be changed.
7. Click Save.
98-148232-K
For most modems, leave this setting as is. If you need to change it, talk to
your airtime provider.
If you change the operator setting you must restart the EXPLORER 540
terminal for the setting to take effect.
Chapter 4: Configuration with web interface
Optional: To set up cellular network for data (dual mode)
4-53