COBHAM Satcom EXPLORER 540 User & Integrator's Manual page 169

Parameter Values
<ftp passwd> <ftp passwd>
<ftp server> <ftp server>
<ftp uname> <ftp uname>
<ip_addr_hi> <ip_addr_hi>
<ip_addr_lo> <ip_addr_lo>
<local dir> <local dir>
<mode> 0
1
<new passwd> <new passwd>
<old passwd> <old passwd>
<type> AD
RS
98-148232-K
Meaning
Password for the ftp server.
Host name or IP address of the ftp server.
User name for the ftp server.
The upper IP address of a range of allowed IP addresses. This parameter
is optional; if omitted, only the specified single IP address <ip_addr_lo>
may access the EXPLORER 540.
IP address of the HTTP client that should be allowed remote access to
the EXPLORER 540,
or, the lowest address in a range of IP addresses, if a range of addresses
is allowed.
The name of the local directory in the EXPLORER 540 to use for getting or
saving a file.
Deferred activation.
Immediate activation.
The new password to be used after this command. The password must
be 5 to 15 characters long and cannot contain spaces.
Avoid special characters. Accepted characters: A through Z (uppercase
characters), a through z (lowercase characters) and 0 through 9
(numeric characters).
The old password that is already in the system.
The type of password is administrator password.
The type of password is remote SMS password.
Appendix B: Command reference
AT commands
B-11